#PURÌFICA
DECONTAMINANT - REJUVENATING SHAMPOO FOR COATING
The limestone particles that are deposited on the bodywork can be caused by imperfect drying, by summer storms or sandy rains rich in minerals or by acid rain that weighs down and drastically reduces the life and self-cleaning effect of the protective applied previously.
#PURÌFICA solves the problem at the root by dissolving and sequestering effectively, in a delicate way, the calcium, the mineral deposits deposited on the bodywork and the residues of contamination caused by acid rain.
Share
► The limestone particles that are deposited on the bodywork can be caused by imperfect drying, by summer storms or sandy rains rich in minerals or by acid rain that weighs down and drastically reduces the life and self-cleaning effect of the protective applied previously.
► #PURÌFICA solves the problem at the root by dissolving and sequestering effectively, in a delicate way, the calcium, the mineral deposits deposited on the bodywork and the residues of contamination caused by acid rain.
► #PURÌFICA enhances and revives the characteristics of the nano coatings and sealants previously applied.
► #PURÌFICA does not contain waxes or sealants and does not alter the natural performance of the protection present, thus allowing the detailer to check the real state of life of the applied treatment.
► Its special features make it usable, with excellent results, even with a foam gun.
The #PURÌFICA shampoo is very versatile and can be used with different dilutions. To purify the and surfaces protected by Nano Coating , use at least every 3 washes with dilution 1:60 and apply it with a glove. In case of sandy rains, full of mineral residues, or in the presence of cars with a stay under the snow , always use it as a shampoo maintenance post coating with dilution or as a second pre-wash 1 to 40 leave it i rest for about 4 minutes without allowing it to dry on the bodywork and rinse. # PURÌFICA can be used in foam gun in the dilution of 1 to 6 with a final dilution of 1 to 80 . To eliminate the contamination of limestone more marked: use # PURÌFICA 1:10, dispense it spray and use with glove or brush on the most contaminated part such as emblems and writings chrome of cars plastics around the windscreen wipers . In the case of persistent stains or strong limescale contamination or mineral deposits such as rust stains in concrete, we recommend the use of our # ÈNERGO “Acid Rain Water Stain Remover” .
Instructions:
Avoid direct sunlight, cool the vehicle sufficiently and spray with foam gun or bucket, spray.
After 3 min rinse with a water gun
Dry with a cloth or microfiber cloth
Results:
Dilution:
Car parts
Materials
Type
P102 Keep out of the reach of children.
H318 Causes serious eye damage.
H315 Causes skin irritation.
P280 Wear protective gloves / goggles.
P302 + P352 IN CASE OF CONTACT WITH SKIN : wash with plenty of water.
P305 + P351 + P338 IF IN EYES: rinse thoroughly for several minutes. Remove any contact lenses if easy to do. Continue rinsing.
P332 + P313 In case of skin irritation: consult a doctor.
P337 + P313 If eye irritation persists, consult a doctor.
Contains Quaternary Compound. It can cause an allergic reaction.
Contains: sulphonic acids, C14-16-alkan hydroxy and C14-16-alken, sodium salts, Cocamidopropyl Betaine, Ethoxylated Fatty Amine
#PURÌFICA
SAFE FOR PROTECTIONS
This washing product does not damage the existing layers of protection and only removes dirt.
WHY ARE THE WATER STAINS PRESENT?
If water is not completely removed after rain or car washing car , substances such as dust and minerals present in the water droplets remain on the surface. Minerals such as limestone , which are not visible to the naked eye, cannot be removed with a neutral / alkaline shampoo , which is the main cause of breakage of the layer of the protection coating.
The limestone particles that are deposited on the bodywork, due to imperfect drying, summer storms or acid rain , drastically reduce the beading effect. #PURIFICA solves the problem at the source, effectively but delicately dissolving and removing the calcium deposited on the bodywork or the residues of contamination from rains acid thus restoring the appearance of the coating as just applied. This nano-shampoo maintenance at acid pH, a real novelty in the world of detailing , presents a blend of acids noble buffered.
Extremely innovative, the product eliminates the thin patina generated by limestone residues and which is deposited on the bodywork, enhancing and reviving the characteristics of the nano-coatings and sealants previously applied.
The unbuffered noble acids, specially developed for this shampoo, also allow #PURIFICA to respect the layers of wax and protection.
#PURIFICA has been the subject of careful research, development and tests in laboratories MaFra in collaboration with the most prestigious manufacturers sports car from all over the world for the launch of new models.
YOU MAY BE ALSO LIKE
Related products
-
LUBRICANT FOR CLAYING AND SANDING
⠀ -
HYDRO SEALANT WET COAT TOUCH FREE SEALANT
€19,68 -
NANO SEALANT FOR RAIN GLASSES
€16,61
