#ÈNERGO
ACID RAIN AND MINERAL STAIN REMOVER
#ENERGO removes from glass and bodywork limestone and acid rain residues , significantly shortening decontamination times. Help the detailer in one of the most arduous tasks, removing of traces of limestone from the paint . Its special gel formula allows an easy and easy direct application only in the points where it is needed.
Share
#ÈNERGO removes limescale and acid rain strong contaminations from windows and bodywork, considerably shortening polishing time. Very often, limescale stains cannot be removed with normal polishing: #ÈNERGO is one of the few products that can help the detailer in one of the hardest tasks, the removal of limescale traces from the paint.
Its special gel formula allows quick and easy direct application only in the areas where needed.
Thanks to its formulation features, #ÈNERGO may be used as primer for nano-coating on windows to degrease and purify them. #ÈNERGO has been thoroughly researched, developed and tested in #Labocosmetica® laboratories in cooperation with the most prestigious sports car manufacturers worldwide for the launch of new models.
#ENERGO it can be used in spray mode , if necessary diluting it according to the severity of the contamination with the help of an applicator pad or a soft bristle brush in order to make the most of the decontaminating action.
In the presence of strong and extensive limestone stains that have not been removed from our #PURÌFICA, apply #ÈNERGO – diluted from pure to 1: 5 – on a glove and wipe it with a wet machine , away from the sun, one panel at a time and rinsing; if, on the other hand, after carrying out this step, limescale spots remain, apply #ÈNERGO pure in small drops directly on the surface or pour it on a cotton pad placing it on the bodywork and letting it act for 5 minutes, massaging with circular movements. Then wipe with a damp microfiber. #ÈNERGO does not damage paints and plastic parts, but in the presence of delicate, soft or single-layer paints it is recommended to proceed with caution avoiding to use the pure product to avoid the appearance of halos.
Instructions:
Dilute #ENERGO with water according to the dirt
Spray the solution on the areas where necessary and distribute it like a swab or brush giving the solution time to act for about 2/3 minutes.
Rinse with water.
Results:
Dilution:
Car parts
Materials
Type
P102 Keep out of the reach of children.
H314 Causes severe skin burns and eye damage. H412 Harmful to aquatic life with long lasting effects.
P273 Do not release to the environment.
P280 Wear protective gloves / goggles.
P303 + P361 + P353 IN CASE OF CONTACT WITH SKIN (or hair): immediately remove all contaminated clothing. Rinse the skin / take a shower.
P305 + P351 + P338 IN CASE OF EYE CONTACT: rinse thoroughly for several minutes. Remove any contact lenses if easy to do. Continue rinsing.
P332 + P313 In case of skin irritation: consult a doctor.
P501 Dispose of contents / container in accordance with local / regional / national / international regulations. Contains: ammonium hydrogen fluoride, sulfuric acid
#ÈNERGO
REMOVING LIME AND ACID RAIN
#ÈNERGO has been carefully studied, developed and tested in Mafra laboratories in collaboration with the most prestigious sports car manufacturers around the world for the launch of new models.
- Do not use it in direct sunlight.
- Do not apply it on a hot surface.
- Do not allow the product to dry.
- Once applied and left to dry, the product can cause stains.
For the treatment it is recommended to divide the whole vehicle into parts.
ATTENTION: after the degreasing and decontaminating treatment, any scratches on the clean surface can stand out more.
